Hey guys, I'm building a project vehicle and I'm in need of a 3.8 Series II upper and lower intake manifold. I just need the two manifolds. Let me know what you can do for me. TIA, David.
Announcement
Collapse
No announcement yet.
WTB: 3.8 Series II UIM & LIM.
Collapse
X
-
Re: WTB: 3.8 Series II UIM & LIM.
which ones, the 95-98 ones or 99-02 ones?
also try posting on mifbody.com for some as well. it is the michigan fbody board. ;)
-
Re: WTB: 3.8 Series II UIM & LIM.
well they are the same except for the angle of the inlet, the 95-98 are angled for the angled tb, 99-02 are straight for the straight tb
Comment
-
Re: WTB: 3.8 Series II UIM & LIM.
I suppose that it doesn't matter, since I will have to weld a 90* aluminum elbow to it to make appropriate clearance from the radiator. I am usnig a FWD 3800 from a GTP, and need a RWD mani, since it'll be in my S-10.
Comment
Latest Topics
Collapse
-
by ssms5411Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...1 week ago
Comment