WTB: 3.8 Series II UIM & LIM.

[dcatmich]

Hey guys, I'm building a project vehicle and I'm in need of a 3.8 Series II upper and lower intake manifold. I just need the two manifolds. Let me know what you can do for me. TIA, David.

[97rs4life]

Re: WTB: 3.8 Series II UIM & LIM.

which ones, the 95-98 ones or 99-02 ones?

also try posting on mifbody.com for some as well. it is the michigan fbody board. ;)

[dcatmich]

Re: WTB: 3.8 Series II UIM & LIM.

I wasn't aware that there was a difference. I do know that it is the cast aluminum style with individual runners. Do you have pics on the two?

[97rs4life]

Re: WTB: 3.8 Series II UIM & LIM.

well they are the same except for the angle of the inlet, the 95-98 are angled for the angled tb, 99-02 are straight for the straight tb

[dcatmich]

Re: WTB: 3.8 Series II UIM & LIM.

I suppose that it doesn't matter, since I will have to weld a 90* aluminum elbow to it to make appropriate clearance from the radiator. I am usnig a FWD 3800 from a GTP, and need a RWD mani, since it'll be in my S-10.

[kockymaro]

Re: WTB: 3.8 Series II UIM & LIM.

i have a 01 and a 97 one, also i have lower intakes as well.

[dcatmich]

Re: WTB: 3.8 Series II UIM & LIM.

Thanks.

[kockymaro]

Re: WTB: 3.8 Series II UIM & LIM.

email sent, have 2 of each.