Tweet
I purchased a 2011-2015 BMR Strut tower brace to reduce chassis flex and to prepare for some power gains that will be put on the car. I’ll add pics.
There was a significant improvement in front end stiffness and after driving like I stole it to test the brace it remained in place. Installation was simple you just need a torque wrench the washers and bolts are included. Installation took ab 10min.
NOTE: before purchasing confirm that you have the later style towers that have pre drilled holes (3). I have the later 2011 which came with the holes already drilled if you have the earlier towers you’ll need a different style brace. I will add a picture to show what holes I’m talking about.
There was a significant improvement in front end stiffness and after driving like I stole it to test the brace it remained in place. Installation was simple you just need a torque wrench the washers and bolts are included. Installation took ab 10min.
NOTE: before purchasing confirm that you have the later style towers that have pre drilled holes (3). I have the later 2011 which came with the holes already drilled if you have the earlier towers you’ll need a different style brace. I will add a picture to show what holes I’m talking about.
Attached Files
Approaching Legendary Status
Comment