Double Din 1998-2002 Camaro - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Double Din 1998-2002 Camaro

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ssms5411
    replied
    Cool, Ilike my double din, I bought a extra one for the bezel.

    Leave a comment:


  • LETZRIDE
    started a topic Double Din 1998-2002 Camaro

    Double Din 1998-2002 Camaro

    Apparently Amazon carries the double din kit for the 1998-2002 Camaro's now. $49 versus $200 I paid a few years back when I got my 02 lol. Good to see new support for these vehicles still going around!

    I almost want to snag this as a spare in case something happens to mine... https://amzn.to/3zRqsm9

Latest Topics

Collapse

  • mdiesel
    which balancer do i need
    by mdiesel
    so my engine was originally an L36. upon disassembly i found the crank and rods were out of spec and needed to be replaced. I have a new crank, and i...
    2 days ago
  • mdiesel
    torque converter
    by mdiesel
    not sure what some of you guys with 3.8l's and 4l60e trannys are doing for converters. None of the typical converters that fit this tranny and v8 models...
    6 days ago
  • ssms5411
    2001 supercharged 3.8 Camaro
    by ssms5411
    Guy in the FBody car club is selling his 2001 3.8 Super Charged Camaro for $3200, L32 out of a 2005 , with 5th gen super charger, it’s a manual or...
    1 week ago
  • ssms5411
    Hptuners new interface
    by ssms5411
    Just got a email from Hptuners, you can trade in your cable or Mvpi2 for their new Mvpi3 and you can get 6 credits. I’m thinking about it since I have...
    2 weeks ago
  • ssms5411
    I think I narrowed down my cold start problem
    by ssms5411
    I think it’s the fuel pump, after I start the engine on the second try or give it gas it will start fine. Fuel pressure is 44+ psi when It cranks but...
    2 weeks ago

FORUM SPONSORS

Collapse
Working...
X