Tweet
What numbers do i enter into the IFR table??
-
-
Re: Tuning for GTP injectores
Since their 33lbs on our rail , I would start at 33.00 and scale them from their.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine -
Re: Tuning for GTP injectores
How do i scale them?? you live on the forum dont youComment
-
Re: Tuning for GTP injectores
Nothing else to do , so I'm on here alot.lol To scale them start 33.00 at the 100 and then do like 31.00 in the 0 and use the auto scaling on hptuners, it should get you close then use PE to dial your air/fuel you need.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Re: Tuning for GTP injectores
See how your injectors like the scailing. It caused my WB to deviate a little more than normal. Entering the same flow rate across the board worked better for me.Comment
Comment