Announcement
Collapse
No announcement yet.
will this work for f-bodies?
Collapse
X
-
Re: will this work for f-bodies?
i imagine it would. its the same connector.
our alt on has one wire to the connector, and that says it now works on three wire kits...I guess it would but would it really be worth it is the question...Y87 Package
MANUAL CONVERTED, Pro 5.0 Shifter
Pacesetters, Magnaflow Cat, Cutout, Flowmaster
MOGOB APPROVED!
BONE APPROVED!
VANBIBBER APPROVED!
KRISTEN APPROVED!
Vice Prez.
Team Black...TEAM EMO
sigpic
Come on kids! Get a Calendar!
-
Re: will this work for f-bodies?
All it does it trick the sensor into thinking the alt's not giving out the right voltage, so it works more to increase it. IIRC, there's a how-to somewhere on making one yourself, it's just a simple resistor. As for increase, I'm not too sure. I know on my car i put an additional 6AWG wire coming from the alt, to the accessories terminal on the fender. My headlights don't dim anymore when my system's playing, even at idle :).~97 3.8L V6 Camaro~
A few things
Only Member of Team Hooker?!?
Comment
-
Re: will this work for f-bodies?
why not get a overdrive pulley for the alternator?
2002 SOM Z28 Camaro - 12.9 @ 104 mph
1996 3800 Camaro - 13.43 @ 100.77 mph
Project Cars | How To Guides | Scratch Repair | Synthetic Oil
Comment
-
Re: will this work for f-bodies?
Originally posted by LETZRIDE View Postwhy not get a overdrive pulley for the alternator?Y87 Package
MANUAL CONVERTED, Pro 5.0 Shifter
Pacesetters, Magnaflow Cat, Cutout, Flowmaster
MOGOB APPROVED!
BONE APPROVED!
VANBIBBER APPROVED!
KRISTEN APPROVED!
Vice Prez.
Team Black...TEAM EMO
sigpic
Come on kids! Get a Calendar!
Comment
-
Re: will this work for f-bodies?
i think ill pass on it then. But im probably going to pick up the alt rewire kit.
http://www.zzperformance.com/grand_p...=178&catid=108
but does anyone know if the fuel pump rewire kit works for our cars? and if it is hard to install?
http://www.zzperformance.com/grand_p...=177&catid=108
reason im asking about these is because im doing a cam in the next day or two and heard it helps with bogging
Abbott long tubes,homemade true duals,slp ram air,whisper lid,eibach springs,kyb shocks,BMR subframe connectors, BMR LCA reloc brackets,BMR LCAs. T-top/manual converted
Comment
-
Re: will this work for f-bodies?
Originally posted by Meatyshells View Posti think ill pass on it then. But im probably going to pick up the alt rewire kit.
http://www.zzperformance.com/grand_p...=178&catid=108
Originally posted by Meatyshells View Postbut does anyone know if the fuel pump rewire kit works for our cars? and if it is hard to install?
http://www.zzperformance.com/grand_p...=177&catid=108
reason im asking about these is because im doing a cam in the next day or two and heard it helps with bogging~97 3.8L V6 Camaro~
A few things
Only Member of Team Hooker?!?
Comment
Latest Topics
Collapse
-
I recently ran into a problem where when I drove my battery gauge showed low voltage. I compulsively replaced the battery and it was still doing the same...1 hour ago
-
by LETZRIDEI am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...5 days ago
-
by ssms5411Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...3 weeks ago
-
by LETZRIDE
Building the Tom Henry RS
Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
By: Hib Halverson
At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...02-07-2020, 10:30 PM
Comment