Tweet
ok so about a week ago i fixed the grinding noise my headlight motor was making, but now when I turn on my headlights only my left one comes up, and then when i turn them off, my right headlight pops up. (looks like its winking if i flip them on and off). If anyone could give me a little advice it would be appreciated.
-
-
Re: Help! Light problems
whoops have it backwards, the right one comes up when i turn on the lights and the left one comes up when i turn the lights off -
Re: Help! Light problems
when you fixed the grinding noise you may have reversed the gear, or put the gear back in the wrong spotY87 Package
MANUAL CONVERTED, Pro 5.0 Shifter
Pacesetters, Magnaflow Cat, Cutout, Flowmaster
MOGOB APPROVED!
BONE APPROVED!
VANBIBBER APPROVED!
KRISTEN APPROVED!
Vice Prez.
Team Black...TEAM EMO
sigpic
Come on kids! Get a Calendar!Comment
-
Re: Help! Light problems
nope, already checked. rotated gear 180 degrees to fix the grinding and then this happened so i rotated it 360 degrees to try and sync it with the other light.....nope. so i turned it back to the original worn side of the gear where it was before and it still was only raising one light at a timeComment
-
Re: Help! Light problems
You rotated the motor housing with the magnets in it 180 degrees. Makes the DC motor spin backwards.sigpic
Comment
-
Re: Help! Light problems
^^ good callY87 Package
MANUAL CONVERTED, Pro 5.0 Shifter
Pacesetters, Magnaflow Cat, Cutout, Flowmaster
MOGOB APPROVED!
BONE APPROVED!
VANBIBBER APPROVED!
KRISTEN APPROVED!
Vice Prez.
Team Black...TEAM EMO
sigpic
Come on kids! Get a Calendar!Comment
-
I recently ran into a problem where when I drove my battery gauge showed low voltage. I compulsively replaced the battery and it was still doing the same...1 hour ago -
I am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...5 days ago -
Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...3 weeks ago -
Building the Tom Henry RS
Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
By: Hib Halverson
At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...02-07-2020, 10:30 PM
Comment