gauge cluster and wheel buttons - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

gauge cluster and wheel buttons

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    gauge cluster and wheel buttons

    ok i have a 95 firebird and was wondering how if posible could i get the gauges with 150mp an digtal odmeter to wok?

    and another question i the buttons im my wheel that control the stero dont work i have put an after market stero head unit in my car i am going to be ordering new buttons so my question is could it be someting simpler then the buttons i could fix myself?or should i just order the buttons which i half to any way because mine are flaking

    my last question is mine also never lite up did the leds go bad or did it just not come with them to biging with?

    any advice is thankful
    Tags: None
  • #2
    Re: gauge cluster and wheel buttons

    find a 150 speedo from a 95 model and swap them out. Get a head unit that comes with a remote and have the installer rewire the buttons using the remote input. You sacrafice the remote, but its very nice to have the buttons functional.

    Comment

    • #3
      Re: gauge cluster and wheel buttons

      but how will it read thegauge cluster read it from 150 and mine is not

      Comment

      • #4
        Re: gauge cluster and wheel buttons

        IIRC, if you swap out a certain resistor on the gauge cluster, the 150 cluster will read fine. Everything else will be a direct swap, and your odometer will show the mileage on that cluster, not your car. You could have a dealer or possibly another auto shop change the mileage.
        Last edited by StrtRacer98; 05-18-2008, 09:10 PM.
        ~97 3.8L V6 Camaro~
        A few things

        Only Member of Team Hooker?!?

        Comment

        • #5
          Re: gauge cluster and wheel buttons

          What resistor, would that be?

          Comment

          • #6
            Re: gauge cluster and wheel buttons

            Also could I use a gauge cluster, for a 97 and up camaro?

            Thanks

            Comment

            • #7
              Re: gauge cluster and wheel buttons

              could this same thing be done with the 94 camaro 3.4? without the digital odometer...

              Comment

              • #8
                Re: gauge cluster and wheel buttons

                Have you guys tried searching? I did for about 30 seconds and found this: http://forum.camarov6.com/showthread...hlight=cluster. I'm sure more searching could be even more helpful!
                ~97 3.8L V6 Camaro~
                A few things

                Only Member of Team Hooker?!?

                Comment

                • #9
                  Re: gauge cluster and wheel buttons

                  good one... that idea didnt cross my mind at 146 am.. thanks bro

                  Comment

                  Previous template Next

                  Latest Topics

                  Collapse
                  • LETZRIDE
                    New Owner!
                    by LETZRIDE
                    I am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...
                    5 days ago
                  • ssms5411
                    Little work today
                    by ssms5411
                    Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...
                    3 weeks ago
                  • LETZRIDE
                    Tom Henry RS Pt 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff
                    by LETZRIDE

                    Building the Tom Henry RS
                    Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
                    By: Hib Halverson

                    At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
                    Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...
                    02-07-2020, 10:30 PM
                  View All

                  FORUM SPONSORS

                  Collapse
                  Working...
                  X

                  We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.

                  By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.

                  I Agree