Tweet
Mine only pulls around 30-40Amps max, and I'm running the OEM Alternator. If you use a sub thats 4Ohm or higher per voice coil, and wire it no lower than its rating - you shouldn't have an excessive current draw problem - and therefore your voltage shouldn't wobble.
i.e. my DVC JL 12W6 is Dual 6Ohm, and Im running each coil at 6Ohm. Yes, I am losing about 3dB from the speaker in efficiency - but I havent any excessive current draw either and my voltage stays put [img]smile.gif[/img]
i.e. my DVC JL 12W6 is Dual 6Ohm, and Im running each coil at 6Ohm. Yes, I am losing about 3dB from the speaker in efficiency - but I havent any excessive current draw either and my voltage stays put [img]smile.gif[/img]
Comment