Tweet
Here is what i want to do. I want 2 12" subs dont have to be in the same box then i want to take out the back 2 woofers and put some nice 6x9s and buy one amp for the 6x9s and another for the subs, but my question is where can i fit 2 12s and still be able to have a back seat and use my t-tops?
-
2002 M5 camaro- VTR CAI, custom cat-back exhaust, battery compacitor, pullie, lowering springs, 32mm sway bar, cross-drilled slotted rotars. 1-10\" L7 in cubby. -
Subthump makes a Ttop box for 12's I believe....but forget 6x9s....the speakers in the very back make little difference....but some nice 6 1/2s for the front 4 speakers.<a href=\"http://www.onid.orst.edu/~waltejam/\" target=\"_blank\">98 Bright Red Camaro</a><br />Too many mods to list....check my website -
<blockquote>quote:</font><hr>Originally posted by speedy-v6-camaro:
Subthump makes a Ttop box for 12's I believe....but forget 6x9s....the speakers in the very back make little difference....but some nice 6 1/2s for the front 4 speakers.<hr></blockquote>
Agree with everything. www.subthump.com click on vehicle specific.Comment
-
just get a 1 12" brahma or 1 15" brahma. power it with the ampman revolution amp.
that won't break your bank TOO hard. and it will sound amazing.
don't do anything with the back 6x9's\'96 <b>Quasar Blue</b> Firebird A4<br /><a href=\"http://jamiethekiller@comcast.net\" target=\"_blank\"><i>jamiethekiller@comcast.net</i></a><br /><a href=\"http://www.woodlandrock.com\" target=\"_blank\">my band: woodland</a>Comment
-
<blockquote>quote:</font><hr>Originally posted by jamie:
ampman revolution amp. <hr></blockquote>
I'd like to see you do that! [img]smile.gif[/img]
You don't get around the boards too much huh?Comment
-
na, what happened?
that was my planned setup at the beginning of the summer.\'96 <b>Quasar Blue</b> Firebird A4<br /><a href=\"http://jamiethekiller@comcast.net\" target=\"_blank\"><i>jamiethekiller@comcast.net</i></a><br /><a href=\"http://www.woodlandrock.com\" target=\"_blank\">my band: woodland</a>Comment
-
<blockquote>quote:</font><hr>Originally posted by jamie:
na, what happened?
that was my planned setup at the beginning of the summer.<hr></blockquote>
Ampman went under. Some way shady deals going on. A LOT of people were getting ripped. Had a court case vs. state. Lossed. Adire split from them when things started getting ugly. They are now at www.acoustic-visions.com you can probably dig up some more info about the split over there.Comment
-
Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...2 weeks ago -
Building the Tom Henry RS
Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
By: Hib Halverson
At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...02-07-2020, 10:30 PM
Comment