New rear question

[A fireman]

Ok Im getting ready to "drop" in a 2000 T/A rear into my 94 bird and I want to check everything over like the bearings. First how do i get the axle's out once the caliper is off the brake? Second I found about 1/8"-1/4" play in the pinion input. It dose not wobble just has some room to slide in and out. Is this normal or do i need to add shims to the outside to prevent this?

[LETZRIDE]

Re: New rear question

not sure what you mean by the second part...but in order to take the acxles out, you need to unbolt the cover, Unbolt the C-clamps, take out a bolt in the posi unit, take 2 C-clips out, then you should be able to just pull the axle out by grasping the wheel hub part (area that your studs come through) and pull...

[A fireman]

Re: New rear question

ok the drive shaft input yolk is what i ment. it can be moved in ant out somewhere around 1/4 of an inch. is that normal? thanks for the explanation though