torsen question - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

torsen question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • torsen question

    Is there any difference between a 93-97 torsen diff and a 98-02??? I found a few on ebaythat say they're for an lt1 and for an ls1. I'm assuming I have 3.08 gears, because my camaro is just a standard model with no factory options, so if I buy this I want to buy 3.42 or 3.73 gears. Is there a significant difference between these and 3.08???
    1997 Chevrolet Camaro
    L26, Pacesetter headers, SLP cai, Centerforce DF clutch, Pro 5.0 shifter, UMI short stick, 1le driveline, J&M 35mm front swaybar, UMI lca's/phb/sfc's, KYB AGX shocks, Hotchkis stb.

  • #2
    Re: torsen question

    Originally posted by espey_16 View Post
    Is there any difference between a 93-97 torsen diff and a 98-02???
    not really
    I'm assuming I have 3.08 gears, because my camaro is just a standard model with no factory options,
    check the RPO code
    so if I buy this I want to buy 3.42 or 3.73 gears. Is there a significant difference between these and 3.08???
    very

    Comment


    • #3
      Re: torsen question

      check this out

      http://mods.firebirdv6.com/drivetrain.html

      should give you a good idea about gears, carriers, lsd, etc

      click on the GEARS on the left side
      1998 Chevy Camaro 3.8
      1997 Chevy Camaro Z28 - SOLD 7-23-2011
      1996 Chevy Camaro Z28
      2001 Pontiac Firebird Formula

      Comment


      • #4
        Re: torsen question

        i just put a torsen i my car, install went easy but i bought a non abs carrier so i lost my abs, but it didnt work to well in the first place,

        Comment


        • #5
          Re: torsen question

          Cool, thanks guys.
          1997 Chevrolet Camaro
          L26, Pacesetter headers, SLP cai, Centerforce DF clutch, Pro 5.0 shifter, UMI short stick, 1le driveline, J&M 35mm front swaybar, UMI lca's/phb/sfc's, KYB AGX shocks, Hotchkis stb.

          Comment


          • #6
            Re: torsen question

            if you are drag racing I advise against getting a torsen...I just grenaded the brand new unit I bought last year...

            There are 2 types of carriers, series 2 and series 3...Series 3 is for 3.42 or higher gears I believe (maybe 3.23 as well I cant remember)

            Series 2 is 3.08 and below... If you get a series 2 carrier you can still use a higher gear, just you have to make sure to buy the thicker gears...

            2002 SOM Z28 Camaro - 12.9 @ 104 mph
            1996 3800 Camaro - 13.43 @ 100.77 mph


            Project Cars | How To Guides | Scratch Repair | Synthetic Oil

            Comment


            • #7
              Re: torsen question

              i know series 3 works with 3.23's, i thought they worked with 3.08 also? guess not

              Comment


              • #8
                Re: torsen question

                2.73 and 3.08 are series 2. 3.23 and up is series 3.

                Comment


                • #9
                  Re: torsen question

                  ok there, ya, I wasn't 100% sure about the 3.23 gear

                  2002 SOM Z28 Camaro - 12.9 @ 104 mph
                  1996 3800 Camaro - 13.43 @ 100.77 mph


                  Project Cars | How To Guides | Scratch Repair | Synthetic Oil

                  Comment


                  • #10
                    Re: torsen question

                    Originally posted by bigairboarder44 View Post
                    2.73 and 3.08 are series 2. 3.23 and up is series 3.
                    from the factory, sure...you can buy series 2 3.23+ gears or series 3 -3.08 gears from aftermarket companies

                    Comment

                    Latest Topics

                    Collapse

                    There are no results that meet this criteria.

                    FORUM SPONSORS

                    Collapse
                    Working...
                    X