I have a 1994 3.4 camaro and just did the rear end swap with a 1994 camaro Z28 with disc brakes. I am going to be doing the poly bushings with prothanes master kit (part # 7-2009). I have heard that there is a problem with the tranny mount in that the trans will sit 1/2" lower causing vibration hence needing a spacer. Is this true? I have also heard that if you use a crossmember from a LT1 it is now a direct fit. Is this true? Thanks for any help.
Announcement
Collapse
No announcement yet.
Prothane master kit tranny mount question
Collapse
X
Latest Topics
Collapse
-
by ssms5411Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...1 week ago
Comment