Tweet
OK, so I kind of didn't think about this before I bought the rear end, but because of the year difference, the plug is different between the two rear ends. The thing is, I don't have traction control, so both of the rear ends only have 2 wires, one black, one white. Could I just swap the plug from my current rear end on to the wires of the Z28 rear end I have? I can't see there being a problem.
-
-
Re: Rear end electrical connection?
i think that plug if its the one ontop of the chunk, it is the abs sensor so you can try to swap the connectors i havent done it yetcant wait till my lt1 and nitrous. -
Re: Rear end electrical connection?
If it's the ABS sensor why can't you just swap the sensor?
Briansigpic
Comment
-
Re: Rear end electrical connection?
it should be able to swap i see no real problem there except if the excitor ring on the carrier is larger and therefore the sensors are different and then you need to swap the connectorscant wait till my lt1 and nitrous.Comment
-
Re: Rear end electrical connection?
the sensor and the reluctor ring are the same from v6 to v8
Comment
-
Re: Rear end electrical connection?
Time for a custom build, make a custon adaptor for it man LOL I know for a crossover adaptor my friend and I used some wire (grant it he should left it alone and had it done professionally) lolComment
-
Re: Rear end electrical connection?
problem solved swap the sensorscant wait till my lt1 and nitrous.Comment
Comment