for those of u who seen the sister of this tread in chassis you'll know the deal...but for the rest...i'm taking a zz350/350 that was put in an 85 c20 and puting it in my 94 camaro...what i want to know is...the bell housing obviously won't fit but can it be changed and can the inners of a t-5 be bullet proofed so that i can run this car up in the 500hp range.
Announcement
Collapse
No announcement yet.
another 59% bigger
Collapse
X
-
Re: another 59% bigger
You can get a bellhousing that will mate up. You can have your trans built up to handle it but it wil cost you the more power you put into it. There's a few vendors out there just can't think of any right now.Let's flip a coin. Heads I get tail, Tails I get head.
-
Re: another 59% bigger
Oh yeah there are plenty of companies that will sell you the parts I'm sure. I guess with a manual it wouldn't be so bad. I would never attempt it with my auto.Let's flip a coin. Heads I get tail, Tails I get head.
Comment
Latest Topics
Collapse
-
by ssms5411Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...1 week ago
Comment