Tweet
I am planning some mods for my car in the week or so. So I am putting all the parts together so I can install all at once. I am planning headers with the 3" Texas rumble an aluminum drive shaft and 3.73 gears and posi. The only thing I am not sure about is the gears and posi. I purchased them on Ebay. http://i2.ebayimg.com/03/i/06/25/a0/fe_1.JPG
First off will this work on my car (1997 Camaro T5) and second, what else will I need to make sure everything is done correctly. I currently have 3.23 and am going to 3.73. I have some experience with transmissions but not rear ends and any advice would be appreciated.
First off will this work on my car (1997 Camaro T5) and second, what else will I need to make sure everything is done correctly. I currently have 3.23 and am going to 3.73. I have some experience with transmissions but not rear ends and any advice would be appreciated.
