Tweet
im dropping an LT1 into my 3.4 my buddy has an 88 Z28 and just got a new rear end can i swap his rear end into mine. because i want it cause its cheap and posi
-
-
I was wondering this myself but don't know too much about 3rd gens. Even though it's limited slip didn't they use like 2.73 gears back then? I'm not too sure. If it's 3.42 that would be cool. But since it's from 88 would you really want a rear end that old in your car even if it is interchangeable? -
No you cant put a 3rd gen. rear end in a 4th gen. car. I would check local salvage yards. That is where I got my rear end and it has rear disc brakes and a 3.42 gear.1995 black firebird,t-tops,3.4L M5 Comp cam,gutted cat,Cold Air,80 series flowmaster,limited slip rear end with 3.42 gear, Hurst Billet Plus, 17\" American Racin Torq Thrust IIComment
-
Thats a good find fearfactor, we got a fbody junkyard down here but all they got is from 1st gens to 3rd gens. Unfortunatley no 4ths.Comment
-
just curious why u cant do itComment
-
I am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...3 days ago -
Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...2 weeks ago -
Building the Tom Henry RS
Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
By: Hib Halverson
At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...02-07-2020, 10:30 PM
Comment