My car has benn doing this for a while now but im kind of concerned about it. It makes a klump sound. It does it when it is moving slowly, but not yet in first gear, if im slowing down to take a corner it does it as i accelerate, out of it. My explanation of the problem is probably hard to follow, but I dont know how else to describe it. Anybody know what the problem might be???
Announcement
Collapse
No announcement yet.
Do I have transmission problems???
Collapse
X
-
tranny mount perhaps\'96 <b>Quasar Blue</b> Firebird A4<br /><a href=\"http://jamiethekiller@comcast.net\" target=\"_blank\"><i>jamiethekiller@comcast.net</i></a><br /><a href=\"http://www.woodlandrock.com\" target=\"_blank\">my band: woodland</a>
-
thats what mine is doing right now too, but it also does it when i jump on the gas at a low speed... it sounds like a broken tranny mount to me. i think runnin my slicks at the track the other weekend did it in-Aaron, AKA ATL2001<br />93 3.4L <br /><a href=\"http://www.ilfba.com\" target=\"_blank\">www.ilfba.com</a>
Comment
-
If it is a big clunk that you can feel through the center council, then it is probably the tranny mount.
If you can't feel it under you, it could be U-joints, or your gears might have a little play.
There isn't that much that would really make a clunking noise inside an automatic transmission. If the transmission was so far gone as to start making a clunking noise, you would probably notice other problems with it too.<a href=\"http://www.fatninjas.com/camaro\" target=\"_blank\">\'96 Camaro Convertible</a>
Comment
-
<blockquote>quote:</font><hr>Originally posted by StudlyCamaro:
thats what mine is doing right now too, but it also does it when i jump on the gas at a low speed... it sounds like a broken tranny mount to me. i think runnin my slicks at the track the other weekend did it in<hr></blockquote>
Yeah, at low speeds. So it is probably a tranny. mount then. That's not very hard to fix is it??1995 3.4-Blackouts, 3 10\" MTX Subs, High flow cat, Faze voltmeter & air/fuel gauges Kenwood 800w amp,80\'s series Flowmaster, . ....more to come
Comment
-
shouldnt be hard to replace. just get the car on jackstands, then jack up the tranny a bit , remove the bolts holding the mount, pull the mount, then put the new one in, and bolt it up.-Aaron, AKA ATL2001<br />93 3.4L <br /><a href=\"http://www.ilfba.com\" target=\"_blank\">www.ilfba.com</a>
Comment
Latest Topics
Collapse
-
by ssms5411Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...1 week ago
Comment