Tweet
How long should it take me to install it? any tips?
-
Silver 2000 Firebird A4<br />3.8 A4<br />14.746 @91.98 Feb /03/02<p>1990 Mitsu GSX 5Spd I just got it.<p>Otis for President 04 !!!!!! -
It takes me about 10 minutes from the first pump of the jack to lowering the car down. But I've done it about 15 times or so now.
I'd say a half hour at the most, if you take your time.
About the only tip I can think of is to not try and align the bolt hole by threading the center bolt. Instead, jack the tranny up and wait till its flush with the crossmember - then put that center bolt in.
Its really straight forward once you get down there.
5 bolts on the crossmember - 2 on each side. 1 center bolt.
And the transmission mount is held in place by two bolts.
I think you need a 14 and 15mm sockets with a 6" extension.<b>15.41</b> @ 89.80 & 15.45 @ <b>91.64</b>, 2.21 60ft, 3,440 raceweight, using <b>OEM</b> Equipment. <br />\'98 L67/M49 w/ 134,000 miles before spun bearing. \"<i>It\'s all stock, Baby</i>!\"
Comment