Tweet
was there ever a 6 speed in a 3.4? if so, does anybody have the specs on it? thanx
-
1985 S-10 w/ 3.4 engine, edelbrock intake manifold w/ 4barrel 500 cfm carb, k&n air cleaner, single glass pack Y\'s into 2-2 foot 3.5\" \"boom tubes\"...very loud -
nope, just 5spd from factory.
Never seen it done aftermarket either but its doable2002 5-spd NBM Camaro
Details: www.1lev6.com -
Het Dominic, Is it possible to install a f-bod 93+ 6 spd in out V6's? I'd love to have better gas mileage on the highway. What's involved in that swap?
Thanx,
MarcsigpicComment
-
I apologize, "ouR" V6's.
-MarcsigpicComment
-
ya, thats kinda the same thing i'm wanting to do, but in a 1985 S-10 that i put a 3.4 in.1985 S-10 w/ 3.4 engine, edelbrock intake manifold w/ 4barrel 500 cfm carb, k&n air cleaner, single glass pack Y\'s into 2-2 foot 3.5\" \"boom tubes\"...very loudComment
-
I am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...2 days ago -
Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...2 weeks ago -
Building the Tom Henry RS
Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
By: Hib Halverson
At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...02-07-2020, 10:30 PM
Comment