Besides making a spacer to raise the transmission to it's stock height, do you have to drill a hole in the crossmember? It looks like the bolt would sit near the edge of the crossmember. How did you guys who installed the Energy Suspension mount install it?
Announcement
Collapse
No announcement yet.
Crossmember modification with Poly trans mount
Collapse
X
-
Hey Ian, did you also widen the bottom larger oval (one that gives you access to the bolt)? I widened mine just enough to get an open ended box wrench in there.<a href=\"http://members.cox.net/95batmobile/d86f.jpg\" target=\"_blank\">Sinister Six</a> <br /><b><a href=\"http://www.cardomain.com/id/c_o_jones\" target=\"_blank\">Cardomain</a></b><br />--This doesn\'t change the fact that I am ~The Guru~ who still kicks puppies...
Comment
-
I managed to reach in the stock hole with a crow's foot to get the mount tightened up enough, so I only enlarged the slot on the top side to line everything up. I love angle grinders..Drivetrain Moderator - "There are no stupid questions, only stupid people!"
2001 Pewter Firebird Y87, M5
Intake, exhaust, just about every suspension part, alum flywheel & ds, Turn One p/s pump and cooler
Go Sabres!
Comment
Latest Topics
Collapse
-
by ssms5411Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...1 day ago
Comment