Ram Adjustable MC - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Ram Adjustable MC

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ram Adjustable MC

    Anyone running one of these? I've looked at the stock ACDelco part for the T5 and T56 transmission master cylinders, and they're the same part number, so I'm assuming that this will work on the T5 too.
    http://www.texas-speed.com/p-1344-ra...-cylinder.aspx

    I went to go get my clutch flushed, and they couldn't do it because my master cylinder rod has collapsed. So I have to buy a new master cylinder for the car.

  • #2
    Re: Ram Adjustable MC

    Just an update.

    Got it installed at a local shop, had them drill out the restriction in the line. Took about 2.5 hours. The adjustable end had to be ground down a bit to fit.

    Pedal feels AMMMMMMMMMMMAZINGGGGGGGGGGGGGGGG.

    Comment


    • #3
      Re: Ram Adjustable MC

      Hmm, I'm running a Tick and that thing is spot on.

      Comment


      • #4
        Re: Ram Adjustable MC

        I looked up the Tick MC, that thing is way out of my price range...

        Comment


        • #5
          Re: Ram Adjustable MC

          So the adjustable mc can work on T5?

          Comment


          • #6
            Re: Ram Adjustable MC

            Yep. SN for ACDelco MC for the t5 and t56 transmissions are the same according to rock auto. All Ram did was chop off the rod and weld on a new adjustable one. The shop Dodd have to grind down the eye a bit though to get it to fit.

            Comment

            Latest Topics

            Collapse

            There are no results that meet this criteria.

            FORUM SPONSORS

            Collapse
            Working...
            X