so i think my car has the y87 package because i have a posi rear end in my 98 camaro but i think thats the only way to tell if you have the y87 package, but what rear end would i have?a 10 bolt?
Announcement
Collapse
No announcement yet.
Rear end question
Collapse
X
-
Re: Rear end question
You should have a Y87 code on your car, I think its GU5 or GU6 you will have a 10 bolt posi with 3.42's.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
-
Re: Rear end question
Originally posted by 3.8lcoty View Posthaha sr i think i will just start sending u messages if i have a question because you have had an answer to every one of my questions
I'm bored so I just try to answer questions if I can to pass the time.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
Comment
-
Re: Rear end question
but if i didnt have the y87 if i whent to spin my tires i would only spin one right and so this diff cover should fit my rearend
http://www.hawksthirdgenparts.com/ca...entgasket.aspx
Comment
-
Re: Rear end question
Yes that will fit the rearend cover, I have one.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
Comment
-
Re: Rear end question
No paint on the diff cover. You most likely have open 3.23's if not a Y87. what year is your 3.8 and what trans do you have , you can check on your vehicle vin # will tell you everything.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
Comment
-
Re: Rear end question
Most likely 3.23' open unless you check your vin #.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
Comment
-
Re: Rear end question
It didnt, the 5spd came with open diff and 3.23. Look in the drivers door for the RPO codes, you are looking for GU6 (3.42 gear ratio) if you see GU5 then you have 3.23. G80 is the RPO code for limited slip. The RPO code for y87...is Y87 lol.Team NoVa
2000 Firebird- Intake, Pacesetters, !cat, full 2.5 to flowcrapster, 1.9 rockers, LS6 springs and Intense modded retainers, WS6 speedlines, T/A bumpers and hatch, 5 spd swapped, SOON TO BE nitrous'd and cammed.
Comment
-
Re: Rear end question
Then you are good. Get a set of 3.73's in there and be done with it!!Jeff ..
1998 Firebird.. Built 3.8 with a 125 shot.. 370rwhp,415rwtq.. stock tune!! sold
2002 WS6 T/A.. Bolt ins..448rwhp
2009 G8 GT.. Vararam intake, GXP axleback
1998 Corvette.. Vararam intake, Ti axleback
http://www.fquick.com/slow-v6
Comment
Latest Topics
Collapse
-
by ssms5411Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...14 hours ago
Comment