Tweet
I have a 3.4L V6 plan on purchasing a clutch kit my choice is The Spec Clutch Stage3 SC333.
Just wanted your feedback on what you use and response.
Just wanted your feedback on what you use and response.
-
-
Re: Which Clutch works best based on choice and use???
if your car is stock, a stock replacement is probably best.
you have to give some info about your car before we can recommend you a good clutch -
Re: Which Clutch works best based on choice and use???
I had a Spec stage 3 with the carbon disc, it was alot firmer than stock but , it just took some time getting use to it, more gas when letting out was good. It held while my 3rd gear broke when I was running my PD at 8-11LBS of boost, so I'll give it a thumbs up.LOLLast edited by ssms5411; 09-19-2010, 09:07 PM.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Re: Which Clutch works best based on choice and use???
I've got a spec stage 3 and aluminum flywheel, works pretty damn good!Comment
-
Re: Which Clutch works best based on choice and use???
Ok well I am still building my engine has a Comp Cam 260 kit head have been matched ported and polished using Total Seal Gapless Rings upgraded to 19lb injectors Headers High Volume Oil pump,I plan on using the SC333 stage 3 spec clutchComment
-
Re: Which Clutch works best based on choice and use???
Good choice you'll like it , just give it more gas when letting out and it won't chatter.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
I recently ran into a problem where when I drove my battery gauge showed low voltage. I compulsively replaced the battery and it was still doing the same...1 hour ago -
I am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...5 days ago -
Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...3 weeks ago -
Building the Tom Henry RS
Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
By: Hib Halverson
At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...02-07-2020, 10:30 PM
Comment