Going to the Infieon Raceway to Drag - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Going to the Infieon Raceway to Drag

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Going to the Infieon Raceway to Drag

    tonight guys i am going to Try again to Race my Maro. Last time my best was a 16.01 lol that was horrible, but since then i have done Intake, Took off my Cat, Synthetic Oil Change, Lets see if these Mods even help on the Strip!!!! ha-ha Wish me luck.

  • #2
    Re: Going to the Infieon Raceway to Drag

    Good luck, I guessing 16.00. LOL kidding , break into the 15's.
    08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
    96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

    Comment


    • #3
      Re: Going to the Infieon Raceway to Drag

      Lol Well im back And I went about lets See 3 months Ago and my best was 16.045 ok but this time My time slip looked like this
      Rt:.047
      60' 2.259
      330' 6.620
      660' 10.236
      mph 68.53
      1000' 13.310
      1/4 15.947
      mph 85.09
      it was 87 F. it was 21 humidity and 29.76 on the barometer

      Comment


      • #4
        Re: Going to the Infieon Raceway to Drag

        I am happy Finally in the 15's lol but sh*t barley lol Any ideas how i can get into High 14's or very low 15's I have Intake, air filter, exhaust,700r4 with a shift kit ,

        Comment


        • #5
          Re: Going to the Infieon Raceway to Drag

          Well, I was going to suggest DA; I did some calculations and come up with a 2176 DA. Get a better night and you should be able ti. I'd say more practice man. Also, in another thread you said you just had the back half of a flowmaster exhaust; you're exhaust is only as good as it's biggest restriction, so it's not helping much over stock. Replace the rest of the piping and you should see some better times :). Main thing though: PRACTICE! I've ran high 15's in my cammed car because of weather, traction and lack of skill :P
          ~97 3.8L V6 Camaro~
          A few things

          Only Member of Team Hooker?!?

          Comment

          Latest Topics

          Collapse

          • LETZRIDE
            New Owner!
            by LETZRIDE
            I am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...
            3 days ago
          • ssms5411
            Little work today
            by ssms5411
            Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...
            2 weeks ago
          • LETZRIDE
            Tom Henry RS Pt 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff
            by LETZRIDE


            Building the Tom Henry RS
            Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
            By: Hib Halverson


            At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
            Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...
            02-07-2020, 10:30 PM

          FORUM SPONSORS

          Collapse
          Working...
          X