c5 wheels question - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

c5 wheels question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • c5 wheels question

    Does any one know why stock corvette c5 wheels will not fit on a 1995 camaro… I went to get them on today and they said they wont fit due to the hub or something like that. I was mainly wondering if there was anything I could do to make them fit?

    Has any one else had this problem?

  • #2
    Re: c5 wheels question

    you should be able to put a spacer on and then they should fit just like...How wide and 17s or 18s?

    Comment


    • #3
      Re: c5 wheels question

      the rears might be to wide unless i tub out the wheel wells.. the rears are 18x10.5 and the fronts fit fine...

      do you know what kind of spacers i could get?

      Comment


      • #4
        Re: c5 wheels question

        You need to slightly grind down the rear hubs...real easy and they should go right on
        1999 Camaro Z/28
        1973 Firebird Formula

        Comment


        • #5
          Re: c5 wheels question

          do you think the 10.5 inche wide will pose a problem?

          Comment


          • #6
            Re: c5 wheels question

            My 9.5's come close but no rubbing at all...

            You might have issues, you can get spacers then.
            1999 Camaro Z/28
            1973 Firebird Formula

            Comment


            • #7
              Re: c5 wheels question

              width of 10.5 in the back will be no problem. yeah, this has been discussed many times. the hub needs to be ground down a little
              2000 3.8 A4 Pewter Camaro

              Comment


              • #8
                Re: c5 wheels question

                yeh would be fine my bros running 10.5 Z06s on this 00 and there fine. But the spacer makes them stick out more and looks bad @$$ in my opiton..

                Comment


                • #9
                  Re: c5 wheels question

                  cool thanks all... really appreciate the help

                  Comment

                  Latest Topics

                  Collapse

                  • LETZRIDE
                    New Owner!
                    by LETZRIDE
                    I am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...
                    3 days ago
                  • ssms5411
                    Little work today
                    by ssms5411
                    Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...
                    2 weeks ago
                  • LETZRIDE
                    Tom Henry RS Pt 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff
                    by LETZRIDE


                    Building the Tom Henry RS
                    Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
                    By: Hib Halverson


                    At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
                    Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...
                    02-07-2020, 10:30 PM

                  FORUM SPONSORS

                  Collapse
                  Working...
                  X