Need an idea

[LETZRIDE]

I feel like Im in grade 6 all over again...I need to come up with a 3 minute speech by 1:30 today...what in the hell can I talk about for 3 minutes? someone help me come up with an idea...but don't make it too general...I was thinking cars, but I need to narrow it down more.

Let your imaginations run wild, my brains fried so I can't think lol.

[Pewter02Camaro]

Re: Need an idea

Give a speech about the usefulness of WD-40, and its many uses.

[LETZRIDE]

Re: Need an idea

lol, as a car guy, Im ashamed to say that I don't know all that much about wd-40 other than you can use it on almost anything except food. But thats not a bad idea, I might google it a bit.

[Cdr.Instigator]

Re: Need an idea

Duct Tape and it's many uses!

[LETZRIDE]

Re: Need an idea

Duct Tape and it's many uses!

You're a genious...except Im replacing duct with "hockey"....wayyy more uses...hockey tape fixes everything!!

[Docta]

Re: Need an idea

When that's comebup, I've always talked about idiot drivers, SC vs TC, or something music related.

[1997Canadian3.8]

Re: Need an idea

Talk about how firing Ron Wilson doesn't change the fact the leafs don't have secondary scoring or a good captain and wont make the playoffs until they do! haha

[LETZRIDE]

Re: Need an idea

Hahhah...leafs is not a good topic to discuss in toronto right now...not unless you're wearing a bullet proof vest...

[2.8 Bird]

Re: Need an idea

Aaahhh, the good 'ol improptu in speech class. I talked about ways to save on your gas. Like tuning, having a light foot, and so on.

[cam98aro]

Re: Need an idea

i know this is old, but i did mine on how to drive a manual, and the benefits of owning a manual car

[transamtom1]

Re: Need an idea

Your car and how your buildiing it yourself.

You could do a 1/2 hour on the tranny alone;)

[4thgenowner]

Re: Need an idea

You could have talking all the boning Mike does. Jesus.

[ssms5411]

Re: Need an idea

So what did you end up talking about?

[LETZRIDE]

Re: Need an idea

Your car and how your buildiing it yourself.

You could do a 1/2 hour on the tranny alone;)

hahaha...it's back together and at champion motors right now to get swapped in....I'm so pumped I was able to get that done myself.

Last time I talked about stall converters people had no clue what I was talking about, it was kinda funny.

I ended up talking about hockey tape and how it supercedes every other tape...made for a bit of a funny speech, I couldn't do something too rediculous...suprisingly it was actually worth a good chunk of a mark.