Tweet
hey guys i am lookin for a 3.8L and crank, so i can build it up to take some boost in my 97 thanks guys
-
-
Re: 3.8 block/ crank
get a 1998+ junk yard motor and star from there :naughty:Originally posted by bigblock10
search ebay and ask
www.tacreationsusa.com << they are also on ebay
also try FWD boards like 3800pro and clubgp.comwww.turbov6camaro.com
1997 3800 Series II Camaro
4600 Stall for my ride to the mall :chug:
7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty
-
-
Re: 3.8 block/ crank
car-part.com2k2 camaro, K&N, SLP whisper lid, Konis, AEM, HP Tuners, Angel eyes/Halos, CF SS ram air hood, 4.10s, Zexel Torsen, UMI SFCs, CrossFire, BFGs, Gatorback, Catco, Flows, and TLC! DONT feed the Trolls!Comment
-
Re: 3.8 block/ crank
I have a few L67 supercharged bottom ends if you are interested, 3 of them just have the crank in the block and are in good condition, also have rods which are stronger than the L36 rods. I am located in Fort Wayne, IN and dont really have any way to ship this stuff so it would pretty much have to be pickup unless you could around a way for shipping. $150 for block, crank, rods, misc if interested.Comment
-
Re: 3.8 block/ crank
i am in lasing MI so its not that far from you. how much you want for the gtp block/rods/crank .Comment
-
Re: 3.8 block/ crank
$150 for a block with a good crank and rods. Pistons will be included also whether you want them or not as they are still on the rods. Lansing is only 2-2.5 hours from here and its very easy to get to from I69.Comment
-
Re: 3.8 block/ crank
so the motor is out of a gtp? do you have any idea how many miles are on it. iam going to have it re built but just wanted to know... pm so we can set up a pickup time. might not be this weekend tho i have a quad race this weekend but i still dont know yetLast edited by bigblock10; 09-25-2006, 07:37 PM.Comment
-
Re: 3.8 block/ crank
It doesnt look like I can PM you or I just dont know how to find it on here, just send me an email and we can discuss pickup. My email addy is in my profile.Comment
-
Re: 3.8 block/ crank
ok check your mailComment
-
I am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...4 days ago -
Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...2 weeks ago -
Building the Tom Henry RS
Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
By: Hib Halverson
At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...02-07-2020, 10:30 PM
Comment