Ok, so i dropped a valve in my car and shattered the piston but im getting the bottom end rebulit and all, but for the top end, i was wondering if anyone has some 105# springs (brand doesnt matter), valve spring retainers, valve locks, re-usable rocker arm bolts and a set of cylinder heads? I know i can buy all this stuff new, but i was looking to save a little money and get some things off of your guys' hands. Thanks.
Announcement
Collapse
No announcement yet.
Valvetrain
Collapse
X
-
Re: Valvetrain
Once my new heads and stuff go on and can sell you all my used stuff , plus a new Rolling master single timing chain and tensioner if you need it. I'll see if I can set it up for this week and it will take 3 days to do , so I'll post back.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
Comment
-
Re: Valvetrain
I have a complete set of L36 heads off my '97 firebird. Looking for $100 + shipping. The car had 208,000 miles on it. I dont know if the seals leaked or not b/c it threw a rod and was smoking badly from that when I got it.
Comment
Latest Topics
Collapse
-
by LETZRIDEI am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...2 days ago
-
by ssms5411Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...2 weeks ago
-
by LETZRIDE
Building the Tom Henry RS
Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
By: Hib Halverson
At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...02-07-2020, 10:30 PM
Comment