turbo cold side - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

turbo cold side

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • turbo cold side

    here is MY cold side set up. If you are building your setup this would work great. It was in MY 97 camaro, piping allows to keep the ABS unit in place.

    intercooler core size is 17 x 12 x 3. the intercooler inlet and outlet is 3"

    preintercooler piping size is 2 1/4" post intercooler is 3" then bumps up to 3.5" ish to fit the angle TB. The nitrous nozzle will not be included, you can plug it.

    comes with a SSQ BOV old school. it works just fine. I ran 450+ hp through the system with no issues.

    reason for selling, AIR to WATER *****es. lol









    400.00 + shipping

  • #2
    Re: turbo cold side

    this would save someone alot of time and money.

    Comment


    • #3
      Re: turbo cold side

      no one yet huh? hmmmm

      Comment


      • #4
        Re: turbo cold side

        where are you located?

        Comment


        • #5
          Re: turbo cold side

          sioux falls sd 57106

          Comment


          • #6
            Re: turbo cold side

            shipped to 02745 cost?

            Comment


            • #7
              Re: turbo cold side

              it'll be about 30 bucks, I'll split it and do 15.00. You know if your serious hell I'll 1/4 it and do 7.50. total 407.50

              Comment


              • #8
                Re: turbo cold side

                this is just not a simple bolt up is it? do ihave to add or change anything else? or can i just get it tuned? pm'd you my #

                thanks!

                Comment


                • #9
                  Re: turbo cold side

                  Originally posted by kdm212 View Post
                  this is just not a simple bolt up is it? do ihave to add or change anything else? or can i just get it tuned? pm'd you my #

                  thanks!
                  are you talking about a whole turbo system or just the cold side..???

                  Comment


                  • #10
                    Re: turbo cold side

                    lol um cold side. wow i feel so dumb.

                    so i should expect no increase in power?
                    Last edited by kdm212; 03-23-2010, 03:04 PM.

                    Comment


                    • #11
                      Re: turbo cold side

                      lol. only cold side

                      Comment


                      • #12
                        Re: turbo cold side

                        Now thats a cold air induction setup. J/K LOL
                        08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                        96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                        Comment


                        • #13
                          Re: turbo cold side

                          ok so i need the turbo also. duh. so this is useless without the turbo.

                          Comment


                          • #14
                            Re: turbo cold side

                            Originally posted by kdm212 View Post
                            ok so i need the turbo also. duh. so this is useless without the turbo.
                            You need alot more than a turbo.
                            08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                            96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                            Comment


                            • #15
                              Re: turbo cold side

                              this is why i try not to venture into things i have no idea about. i look like a fool!!! haha

                              Comment

                              Latest Topics

                              Collapse

                              • LETZRIDE
                                New Owner!
                                by LETZRIDE
                                I am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...
                                3 days ago
                              • ssms5411
                                Little work today
                                by ssms5411
                                Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...
                                2 weeks ago
                              • LETZRIDE
                                Tom Henry RS Pt 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff
                                by LETZRIDE


                                Building the Tom Henry RS
                                Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
                                By: Hib Halverson


                                At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
                                Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...
                                02-07-2020, 10:30 PM

                              FORUM SPONSORS

                              Collapse
                              Working...
                              X