Built 3800 for sale!!

[3800SoloWing]

Re: Built 3800 for sale!!

How much for the piston rings, piston heads, and cam?

[pacefabricating]

Re: Built 3800 for sale!!

How much for the piston rings, piston heads, and cam?

Ha??? the pistons and rings, and heads???

[ssms5411]

Re: Built 3800 for sale!!

I would be interested in the damper depending on price.

[pacefabricating]

Re: Built 3800 for sale!!

the dapner has to go with the rotating asse.... Everything is balance togather!!!!!!!!!!!!

Justin

[LETZRIDE]

Re: Built 3800 for sale!!

were you able to find out shipping for me??

[Cutlass3800]

Re: Built 3800 for sale!!

SFI custom flexplate that is ment to us a th400

A TH400 transmission won't bolt up to a 3800 engine and I don't see a bellhousing adapter listed.... so, the flexplate was originally a th400 flexplate that SFI modified to work with the 4L60e transmission? If I have that right, then why? I've never heard of anyone destroying the stock flywheel before. How big of stall were you planning on running?

[pacefabricating]

Re: Built 3800 for sale!!

A TH400 transmission won't bolt up to a 3800 engine and I don't see a bellhousing adapter listed.... so, the flexplate was originally a th400 flexplate that SFI modified to work with the 4L60e transmission? If I have that right, then why? I've never heard of anyone destroying the stock flywheel before. How big of stall were you planning on running?

Nope Its a special made for the 3800 to bolt up to a th400. All you will need to make is a mid plate that goes between the motor and trans that the th400 bolts up to.. Jims Performance Trans can take care of that. That who was going to make owers.. There located in Eaton Rapid, Mi.. Jim is very good!! That flex plate is a brand new and very expensive!!!

[pacefabricating]

Re: Built 3800 for sale!!

were you able to find out shipping for me??

I need you to pm me your address for i can get pricing.. Sorry been really bussy..
Justin

[pacefabricating]

Re: Built 3800 for sale!!

MORE INFO ON THE ROCKERS:
Hi-Tech™ Stainless Steel Rocker Arms - 7/16" Stud, 1.6 Ratio

DESCRIPTION:


Hi-Tech™ Stainless Steel Rocker Arms are the toughest rockers in racing, and that's why they're the choice of professionals. They are engineered to minimize reciprocating weight - meaning more rpm and longer valve train life, as well as race-winning durability. Available in ratios to suit every camshaft profile, these rockers are an investment that pas big dividends in performance and dependability.

• Made from 15-5PH stainless steel, a premium allow that is high in nickel and chromium
• Rigidity tested at 52,000 pounds/inch and proven to resist power-robbing deflection
• Extra large trunions and more needle bearings to spread out the load and reduce wear and increase durability

[pacefabricating]

Re: Built 3800 for sale!!

Posted updated and prices and Cam specs!!!

[pacefabricating]

Re: Built 3800 for sale!!

Come on people this stuff has to go!!!

[pacefabricating]

Re: Built 3800 for sale!!

what no one is interested in any of this stuff?????