Tuning 2017 3.6L v6 Camaro - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Tuning 2017 3.6L v6 Camaro

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Tuning 2017 3.6L v6 Camaro

    Looking for input on the tuning of my Camaro, by suggestions? Recommended companies? I want to do an e85 tune, and I’m also in the process of getting a flex fuel kit.

    thanks in advance! Have a blessed day.

    P.S. current and only mods are a K&N intake and muffler, resonator, and secondary cat delete, x pipe replacing resonator.

  • #2
    Are you planning on modding your car more? If so my best advice is to buy a tuner such as hp tuners and learn to tune the car yourself. I think there tuners are $500-$600 but you can keep tuning as many times as you want. This allows you to fine tune your car and continue to grow it.

    Second to that would be finding a reputable shop to dyno tune it. The thing is you'll pay $500-$600 for a good dyno tune. The moment you add a new modification you will want to tune again to optimize

    Third option is a mail order tune. They are ok at best for very minor mods as they need to error on the side of being very safe for all cars in a variety of conditions.

    I have hp tuners and don't regret it one bit

    2002 SOM Z28 Camaro - 12.9 @ 104 mph
    1996 3800 Camaro - 13.43 @ 100.77 mph


    Project Cars | How To Guides | Scratch Repair | Synthetic Oil

    Comment


    • #3
      Yes Hptuners and wideband O2 sensor and you can tune as many mods you want. I think most dyno shops use Hptuners too.
      08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
      96' Camaro M5 to A4 conversion, alot of mods ,see Homepage. GT35R Turbo http://www.cardomain.com/ride/244123...vrolet-camaro/
      https://www.facebook.com/steve.starcher.18

      Comment

      Latest Topics

      Collapse

      • @camaro_szn
        BMR Rear cradle bushing kit for sale
        by @camaro_szn
        I’m trying to sell my BMR rear cradle bushing kit pro version. It fits 2011-2015 Camaro v6 or v8. It’s brand new out of the box I’m just selling...
        4 days ago
      • @camaro_szn
        Hood vent
        by @camaro_szn
        Is anyone running a hood vent? If so, do you use the water drain pan? I was considering taking mine off because I feel like a heavy piece of thick plastic...
        4 days ago
      • transamtom1
        New Old User
        by transamtom1
        Hi everyone I used to be a poster here on the old board

        I have previously owned a 95 Firebird V6 3.4L I used as a winter car for my 94TA...
        1 week ago
      • Spoolin
        Greetings!
        by Spoolin
        Hi all -- figured I'd finally drop in.

        I have a 2002 Turbo 3.8 running a custom fabbed GT40 on stock internals, sleeper car. Took quite a...
        1 week ago
      • @camaro_szn
        Cold air inductions CAI review
        by @camaro_szn
        I installed a cold air inductions intake on my 2011 Camaro a few weeks ago then got it retuned ( a tube isn’t required for the CAI per cold air inductions...
        1 week ago

      FORUM SPONSORS

      Collapse
      Working...
      X