Tweet
Believe it or not this is the first time I'm changing brake pads on my bird. The set up is similar to the 3rd gen so I thought it would be a breeze. For some reason the bolts won't unscrew. I keep turning the wrench and nothing is happening. Why isn't like this?
-
-
Never mind. After staring at it for over an hour I figured it out. The bottom bolt has to be counter by a 16mm wrench while unscrewing it. -
Yes, lol Glad you figured it out. They are a breeze once you do them a couple of times.Originally posted by 2.8 Bird View Post08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Forgot to ask, what pads and rotors you go with?08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
so my engine was originally an L36. upon disassembly i found the crank and rods were out of spec and needed to be replaced. I have a new crank, and i...2 days ago -
not sure what some of you guys with 3.8l's and 4l60e trannys are doing for converters. None of the typical converters that fit this tranny and v8 models...6 days ago
-
Guy in the FBody car club is selling his 2001 3.8 Super Charged Camaro for $3200, L32 out of a 2005 , with 5th gen super charger, it’s a manual or...1 week ago -
Just got a email from Hptuners, you can trade in your cable or Mvpi2 for their new Mvpi3 and you can get 6 credits. I’m thinking about it since I have...2 weeks ago
-
I think it’s the fuel pump, after I start the engine on the second try or give it gas it will start fine. Fuel pressure is 44+ psi when It cranks but...2 weeks ago
Comment