Hey everyone I just wanted to share. I got my fresh rebuild and everything up and running this summer. A few minutes after start up I was getting a P0341 camshaft circuit code. I have been driving myself crazy only to find the problem. The camshaft magnet that sits in the sprocket was in backwards. I'm almost certain this is my problem. I will repost when i get it fixed to see of the code comes back. If anyone has had this happen let me know if it fixed it for you. Thanks!
Announcement
Collapse
No announcement yet.
P0341 camshaft circuit
Collapse
Latest Topics
Collapse
-
by LETZRIDEI am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...3 days ago
-
by ssms5411Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...2 weeks ago
-
by LETZRIDE
Building the Tom Henry RS
Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
By: Hib Halverson
At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...02-07-2020, 10:30 PM