Announcement

Collapse
No announcement yet.

Nitrous?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Nitrous?

    Ok so iv bought a ZEX wet kit 82021 and the kit is rated for a 33-77 shot and I was wondering if I could put a bigger jet on it due to I have a heavily modified motor (kinda) and what elss I should get to put this kit on my car I'm new to the nitrous world so I'm kinda clueless

    Mods. Bored .30 over Cnc heads comp gt2 cam forged Steel Pistons fast toys whisper lid peacesettler headers Taylor throttle body spacer msd ignition and more I can't think of

  • #2
    Re: Nitrous?

    What comes with the Zex kit? I would want a window switch , Wot switch ,bottle warmer , nitrous gauge. Are you a auto or manual? A wideband is a must, I would run the shot they give you and tune that in to working right then go up from there. Hptuners is a must if you don't have it already for the GT 2 cam.
    Last edited by ssms5411; 03-31-2016, 05:38 PM.
    08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
    96' Camaro M5 to A4 conversion, alot of mods ,see Homepage. GT35R Turbo http://www.cardomain.com/ride/244123...vrolet-camaro/

    Comment


    • #3
      Re: Nitrous?

      Originally posted by akaneo View Post
      I'm kinda clueless

      Mods. forged Steel Pistons

      Yea... you are.

      Comment


      • #4
        Re: Nitrous?

        So far iv got the nitrous gauge and a purge kit and I got it all tuned at a shop in town

        Comment


        • #5
          Re: Nitrous?

          And its a manual

          Comment


          • #6
            Re: Nitrous?

            Originally posted by akaneo View Post
            And its a manual
            I would get a shift light. Your going to have to get it dyno tuned if you go up on the shot. I would just get Hptuners and a wideband might save you money in the long run.
            Last edited by ssms5411; 04-09-2016, 01:35 PM.
            08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
            96' Camaro M5 to A4 conversion, alot of mods ,see Homepage. GT35R Turbo http://www.cardomain.com/ride/244123...vrolet-camaro/

            Comment


            • #7
              Re: Nitrous?

              Iv already got the DiabloSport i2000 tuner for my truck if need be I'll just pay the 150 to use it on the car as well
              And I ordered a rmp switch from jegs so that should be here this week I might just use my tuner due to I got bigger injectiors for the car that I will need to get turned aging but will it be a big difference from the dynamic tune and the Diablo tune?

              Comment


              • #8
                Re: Nitrous?

                I would still get a wideband O2 or every time you change the tune your Air/fuel mixture is going to be off and you risk running lean and blowing the engine.
                08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                96' Camaro M5 to A4 conversion, alot of mods ,see Homepage. GT35R Turbo http://www.cardomain.com/ride/244123...vrolet-camaro/

                Comment


                • #9
                  Re: Nitrous?

                  Ok thank you I'll start looking into them

                  Comment


                  • #10
                    Before I put the car up for sale, I had nitrous oxide on my mod'ed '01. On the motor, it made 244.9-rwhp SAE (299 at the flywheel), and with the bottle it made 316.3-rwhp (386 at the flywheel). That's on 94.5-oct fuel and it's about an 85-shot which was all I wanted to go with a stock short block. I used hardware from Nitrous Supply. It was a dry kit...the only safe way to go on a port injected engine, IMO. Nitrous Supply's system feeds reduced gas pressure to the FPR to up fuel pressure when nitrous is enabled. Once it's set-up and tuned the system worked very well.

                    The key to a motor on the bottle which performs well and is reasonable durable is tuning. I do my own cal work using HPTuners and on the motor I tune for .87-lambda at WOT and on nitrous I shoot for about .80-lambda at WOT.

                    Steve is going to post my entire "Tom Henry RS" project series elsewhere on this site fairly soon. Pt 6 will cover the installation and tuning of the nitrous oxide system I had on my three-eight.

                    For those interested, I'm going to put the nitrous hardware I had on the car up for sale sometime in the next few weeks. It will be everything you need to put a 75-shot on a 3800 including two bottles of gas and a throttle body with the nitrous nozzle already installed.

                    Comment


                    • #11
                      How much $ for your mods did it take to get to 245 rwhp? The polishing, extrusion hone, etc.
                      Robert - owner www.FirebirdV6.com "Mid-life crisis? I'm way beyond that!"

                      1996 Black Firebird GTxxxRam Air V6 w/ M5xxxwww.FirebirdGT.com

                      Raven

                      Comment

                      Latest Topics

                      Collapse

                      • Bayboy83
                        2002 chevy camaro V6
                        Bayboy83
                        Hey everyone I'm new to the site and just purchased my first V6 camaro from my sister. Lookin to build the V6 up or go with a bigger v6. Any suggestions...
                        3 days ago
                      • LETZRIDE
                        The Performance Spotlight
                        LETZRIDE
                        A new edition to the website now known as "Performance Spotlight" has been added. Here is where you'll find featured content from automotive...
                        6 days ago
                      • sac2165
                        UPS Guy made an appearance today...
                        sac2165


                        To be continued.......
                        6 days ago
                      • LETZRIDE
                        Building the Tom Henry RS
                        LETZRIDE




                        The idea behind the "Tom Henry RS" Project was to modify a Fourth Generation Camaro, Powered by the 3800 Series II V6, to the point that some of its performance characteristics approached those of the latest V6 Camaros.

                        Recent base-model Camaros come with GM's 3.6-liter, four-cam, direct-injected, "High-Feature V6" which puts out between 313 and 335- horsepower depending on the model year. Our project car build-up modified the 4th gen...
                        1 week ago
                      • sac2165
                        From the Archives
                        sac2165
                        I probably haven't looked at this in 15 years.

                        Curious on how it would compare to a new one.



                        ...
                        1 week ago
                      Working...
                      X