EBay turbo kit - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

EBay turbo kit

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • EBay turbo kit

    https://m.ebay.com/sch/i.html?_from=...turbo+kit+3800

    Thouhts on this...

  • #2
    I don't know about this one,lol Would have to see the hotside a little more closer. Everything else I would junk, even the tiny intercooler.
    08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
    96' Camaro M5 to A4 conversion, alot of mods ,see Homepage. GT35R Turbo http://www.cardomain.com/ride/244123...vrolet-camaro/

    Comment


    • #3
      And whats up with the fan in the pic? Are you suppose to hook it up to something .lol
      08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
      96' Camaro M5 to A4 conversion, alot of mods ,see Homepage. GT35R Turbo http://www.cardomain.com/ride/244123...vrolet-camaro/

      Comment


      • #4
        I think im going to buy the one below it for $575, its the hot side , but ill scrap the turbo and use a t4 for my gt35r. Its about $500 for a t4 exhaust side for my turbo or ill see about using a t3/t4 adapter. Nice find Edgar
        Last edited by ssms5411; 06-01-2018, 08:43 PM.
        08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
        96' Camaro M5 to A4 conversion, alot of mods ,see Homepage. GT35R Turbo http://www.cardomain.com/ride/244123...vrolet-camaro/

        Comment


        • #5
          I was thinking the same thing too. The hot side looks good, but AC has to be deleted, which is hard to do since I literally live in the desert.

          the turbo and the cold side doesn't look good.

          Comment


          • #6
            I don't think the A/C needs to be deleted on this one, just run a open down pipe, thats what Im thinking. I did it with my under K kit.
            Last edited by ssms5411; 06-30-2018, 02:21 PM.
            08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
            96' Camaro M5 to A4 conversion, alot of mods ,see Homepage. GT35R Turbo http://www.cardomain.com/ride/244123...vrolet-camaro/

            Comment


            • #7
              Just found a t3 to t4 adapter on ebay, only 1/2" thick , should have enough clearance.
              08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
              96' Camaro M5 to A4 conversion, alot of mods ,see Homepage. GT35R Turbo http://www.cardomain.com/ride/244123...vrolet-camaro/

              Comment


              • #8
                Bought it, ill let you know how it is when i get it, ill take some pics and compare turbos.
                08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                96' Camaro M5 to A4 conversion, alot of mods ,see Homepage. GT35R Turbo http://www.cardomain.com/ride/244123...vrolet-camaro/

                Comment


                • #9
                  Oh no kidding. Did you buy the hot side only along with the turbo. Yes, please post some pics.

                  Comment


                  • #10
                    Originally posted by 2.8 Bird View Post
                    Oh no kidding. Did you buy the hot side only along with the turbo. Yes, please post some pics.
                    Yes bought the hotside, will post pics. I think I know whos selling the kits, but ill wait to see if they come back to this site. Cartunning just lost a sale btw, if they would of gotten back with me through my emails, sent them 3 , I would have gotten their kit.
                    Last edited by ssms5411; 06-02-2018, 12:19 PM.
                    08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                    96' Camaro M5 to A4 conversion, alot of mods ,see Homepage. GT35R Turbo http://www.cardomain.com/ride/244123...vrolet-camaro/

                    Comment


                    • #11
                      You might be right about the A/C , Lookimg at the 3rd pic where they show the pic of the car, the turbo is mighty close to the A/C canister, i just emailed them to find out. The a/c line has already been modified on mine so its out of the way. Will see.
                      Last edited by ssms5411; 06-03-2018, 08:36 PM.
                      08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                      96' Camaro M5 to A4 conversion, alot of mods ,see Homepage. GT35R Turbo http://www.cardomain.com/ride/244123...vrolet-camaro/

                      Comment


                      • #12
                        I'm sure it going to be a clean set up. Can't wait to see it in your camaro.

                        Comment


                        • #13
                          Hope so, they said my gt35r should work but their checking on the A/C, either way ill install it. Got my turbo tub out and went through everything, forgot how much stuff I had. Going to run the 10lb spring in the Tial wastegate , and use my boost controller to get it to 15lbs of boost. So will see, its not going on until I get the car painted next year. But ill post pics of their kit.
                          08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                          96' Camaro M5 to A4 conversion, alot of mods ,see Homepage. GT35R Turbo http://www.cardomain.com/ride/244123...vrolet-camaro/

                          Comment


                          • #14
                            15psi is alot of boost. That easily over 400rwhp.

                            Comment


                            • #15
                              Its not a daily driver so it should be fine, ill start with 10psi and go from there.
                              08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                              96' Camaro M5 to A4 conversion, alot of mods ,see Homepage. GT35R Turbo http://www.cardomain.com/ride/244123...vrolet-camaro/

                              Comment

                              Latest Topics

                              Collapse

                              • ssms5411
                                Po300 random misfire is back
                                ssms5411
                                Like title says random misfire is back, hard to start also, have to give it gas when cranking it over to start for about 2 years now, thought it was something...
                                1 day ago
                              • 2.8 Bird
                                Walbro 255?
                                2.8 Bird
                                So I was about to purchase this from ebay and the seller told me it won't work for my 98 v6 firebird.

                                He said it's only for v8. I thought...
                                1 week ago
                              • ssms5411
                                Dtc 341 cam sensor
                                ssms5411
                                So last few times Ive started and let the Camaro run for 20min. I ve got a dtc 341 cam sensor, replaced the sensor about a couple of months ago, when...
                                1 week ago
                              • ssms5411
                                Found a good used console
                                ssms5411
                                Got one off ebay, mines cracked in a few places . And of course the lid is broken off, all the used ones off ebay had them all broken off. Also got some...
                                2 weeks ago
                              • Phillpatton18
                                Exhaust manifold bolts
                                Phillpatton18
                                Having trouble with the passenger side exhaust manifold bolts. Any advice to make the job easier. Been a pain in the ass...
                                2 weeks ago

                              FORUM SPONSORS

                              Collapse
                              Working...
                              X