Transmission Compatability

[LETZRIDE]

I swear this was asked/answered before but I can't find it

What other vehicles are compatible with our 4L60E?

[LETZRIDE]

Re: Transmission Compatability

so revisiting this

Are Sonoma's and S10's using the same transmission that we are? i.e a direct swap? I know we can use their torque converters?

Is anything different on their 4l60e versus ours?

[bigbrian442]

Re: Transmission Compatability

so revisiting this

Are Sonoma's and S10's using the same transmission that we are? i.e a direct swap? I know we can use their torque converters?

Is anything different on their 4l60e versus ours?

The 4.3's use a standard Chevy bell housing. Not sure if the 4 cyl uses the same bell we have. I would think if the trans is behind the 4 cyl it has a lower torque rating.

[LETZRIDE]

Re: Transmission Compatability

yes but would the 4cyl be able to use our transmission is more of my concern than the other way around

[bigbrian442]

Re: Transmission Compatability

I would think it could as long as the bell housing is the same.

[transamtom1]

Re: Transmission Compatability

3.8L uses the BOP(Buick/Old/Pontiac) bell housing the tail shaft on F cars is also different,

[bigbrian442]

Re: Transmission Compatability

3.8L uses the BOP(Buick/Old/Pontiac) bell housing the tail shaft on F cars is also different,

The series II 3.8 does not use the BOP bell. The only difference in the tail shaft housing is the bold holes for the torque arm.