ss spoiler installl - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

ss spoiler installl

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ss spoiler installl

    hey i've been doing some research looking for a guide on installing the ss spoiler and cant seem to find one..ive jus seen alot of talk about the third break light. i have a good idea as to what i have to do i just want to make sure im not messing anything up.

    Thanks

  • #2
    Re: ss spoiler installl

    im pretty sure its just a bolt on wing

    Comment


    • #3
      Re: ss spoiler installl

      yea hey slver 3800 i bought an ss spoiler awhile back and it was really really easy ill help ya out

      1- open the trunk and remove the black plastic lining under the edge of the hatch, it helps to do it with a flat head screw driver, you might need to use a bit of force because there are a few like plastic screws that hold it in place
      2- unscrew or unbolt the original nuts for the spoiler
      3- before you take off the old spoiler completely undo the wiring harness that hooks the brake light up to the car's power, it should be just like a plastic buckle
      4- remove the entire spoiler, and clean the area where the spoiler was mounted with a disinfectant prep wipe to make sure no dirt gets in the under the spoiler
      5- mount the ss spoiler on the trunk, this was kind of a two person job for me in order to get a perfect fit
      6- once lined up correctly reinstall the wiring light for the led brake light, meaning plug the ss spoiler brake light cable into the stock buckle for the power coming out of the trunk
      7- make sure you test that the brake light works before you reinstall the bolts!
      8-reinstall the bolts and tighten for a perfect fit, not too tight tho or else everything will crack
      9 reinstall the black plastic liner for the trunk lid, you can pretty much pound it in place with your hands and the black plastic screws will form back into the metal trunk holes

      your all set and enjoy!
      ~Robby
      Robby
      2001 Chevrolet Camaro 3.8 V6

      |JET Chip|Flowmaster American Thunder|K&N Intake|BMR STB|Spohn Rear Sway Bar|

      http://speed-bros.com/
      sigpic

      Comment


      • #4
        Re: ss spoiler installl

        nice instructions.... sticky this?

        Comment


        • #5
          Re: ss spoiler installl

          x2 make this a sticky, i'm about to get a SS spoiler for mine and will be looking for these instructions.
          pacesetters|full 3" borla exhaust|3" stainless e-cutout|slp cai & ram intake|c/f whisper lid|tbs|eibach|kyb|stb|sfc's|adj.lca's & phb|slp fan|b&m t5|180*|z06 17x9.5|8000k hids|hptuners|d/s rotors


          sigpic
          gone in body, but not in spirit

          Comment


          • #6
            Re: ss spoiler installl

            thanks guys.. got it on perfectly fine and i didnt have the third break light problem i was reading about

            Comment


            • #7
              Re: ss spoiler installl

              Ok. Added to how to sticky.
              sigpic
              1996 Chevrolet Camaro
              1995 Buick Park Avenue Ultra
              --Appearance Moderator--

              Comment

              Latest Topics

              Collapse

              • 2.8 Bird
                Ceramic coating vs. Wax
                by 2.8 Bird
                Have any of you guys used ceramic coating. I used to use hydrosilex. It's rated #2 as one of the best ceramic coating. It worked pretty good and it...
                1 week ago
              • Camaro3800v6
                Egr and fuel hoses
                by Camaro3800v6
                hello, since my 02 camaros egr has been discontinued, had to get an older one (believe it's a 1996 Camaro egr.) Could this cause a problem because it...
                1 week ago
              • Mark Thompson
                Dampener Crank Sensor Issue
                by Mark Thompson
                Unable to locate any new or New Old stock high-resolution crankshaft position sensor. Causing issues. The 24x appear to be a discontinued item. Open to...
                2 weeks ago
              • ssms5411
                Throttle percent
                by ssms5411
                What’s your guys tunning on throttle percent? Adjusting mine to 70% up to 3200 rpms then 30% up to 6400 rpms. What’s Yours look like?...
                2 weeks ago
              • ssms5411
                Matte black
                by ssms5411
                What’s your guys thought on matte black? Been thinking about it for my Camaro, should be getting it painted next year. I also want to add my white stripes...
                3 weeks ago

              FORUM SPONSORS

              Collapse
              Working...
              X