Corbeau seat took a crap - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Corbeau seat took a crap

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Corbeau seat took a crap

    So Ive had my Corbeau seats about 8-9 years and the drivers seat took a crap, went to get in it and when putting pressure on the back it just went all the way back. Pulled it up and did the same thing. Went to take it out so I can get a better look at the mechanism, and Im stuck on the rear right nut. Got the front 2 and one by the door but having trouble with the rear by the console. Can't see it just feel it so its almost impossible. Will try again Wednesday to see if I can get it. Back is hurting and Im busy tomorrow. Also I would think being Corbeau it would of lasted longer.
    08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
    96' Camaro M5 to A4 conversion, alot of mods ,see Homepage. GT35R Turbo http://www.cardomain.com/ride/244123...vrolet-camaro/

  • #2
    Got the seat out with a ratcheting wrench, looking for shops right now who work on seats.
    08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
    96' Camaro M5 to A4 conversion, alot of mods ,see Homepage. GT35R Turbo http://www.cardomain.com/ride/244123...vrolet-camaro/

    Comment


    • #3
      Good news called Corbeau and they have reclining mechanism for it and the upholstery guy is going to install it. $25 for the part and $30 to install it.
      08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
      96' Camaro M5 to A4 conversion, alot of mods ,see Homepage. GT35R Turbo http://www.cardomain.com/ride/244123...vrolet-camaro/

      Comment


      • #4
        Got the part, only bad thing is I have to enlarge the tirm holes to put the trim back on. Corbeau said I might have to no biggie, taking it tomorrow to get it put in.
        08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
        96' Camaro M5 to A4 conversion, alot of mods ,see Homepage. GT35R Turbo http://www.cardomain.com/ride/244123...vrolet-camaro/

        Comment


        • #5
          Got it in, took him maybe 30 minutes, will install tomorrow back in the Camaro. Ill post a pic when done.
          08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
          96' Camaro M5 to A4 conversion, alot of mods ,see Homepage. GT35R Turbo http://www.cardomain.com/ride/244123...vrolet-camaro/

          Comment


          • #6
            Got it in the car, took about 10 minutes if that , ratcheting wrench is definitely a life saver. Its nice to have a working seat again.
            08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
            96' Camaro M5 to A4 conversion, alot of mods ,see Homepage. GT35R Turbo http://www.cardomain.com/ride/244123...vrolet-camaro/

            Comment

            Latest Topics

            Collapse

            • ssms5411
              Po300 random misfire is back
              ssms5411
              Like title says random misfire is back, hard to start also, have to give it gas when cranking it over to start for about 2 years now, thought it was something...
              1 day ago
            • 2.8 Bird
              Walbro 255?
              2.8 Bird
              So I was about to purchase this from ebay and the seller told me it won't work for my 98 v6 firebird.

              He said it's only for v8. I thought...
              1 week ago
            • ssms5411
              Dtc 341 cam sensor
              ssms5411
              So last few times Ive started and let the Camaro run for 20min. I ve got a dtc 341 cam sensor, replaced the sensor about a couple of months ago, when...
              1 week ago
            • ssms5411
              Found a good used console
              ssms5411
              Got one off ebay, mines cracked in a few places . And of course the lid is broken off, all the used ones off ebay had them all broken off. Also got some...
              2 weeks ago
            • Phillpatton18
              Exhaust manifold bolts
              Phillpatton18
              Having trouble with the passenger side exhaust manifold bolts. Any advice to make the job easier. Been a pain in the ass...
              2 weeks ago

            FORUM SPONSORS

            Collapse
            Working...
            X