Post your cam/heads setup for the sticky... - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Post your cam/heads setup for the sticky...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Re: Post your cam/heads setup for the sticky...

    Forrest

    GT2 Cam-
    216°/216° at .050"
    Intake Lift .317" (.507" lift at 1.6:1 rocker ratio)
    Exhaust Lift .317" (.507" lift at 1.6:1 rocker ratio)
    111 Lobe Separation

    Stock Heads

    105# springs

    Stock rockers

    Comment


    • #32
      Re: Post your cam/heads setup for the sticky...

      GT2 Cam

      Stock Heads
      Gasket Matched Intake Manifolds
      Stock Valve springs
      Stock Rockers
      Stock Lifters
      ~97 3.8L V6 Camaro~
      A few things

      Only Member of Team Hooker?!?

      Comment


      • #33
        Re: Post your cam/heads setup for the sticky...

        Josh
        Cam - Custom cam grind (Abbott), lances old cam (230/240 .578/544 112)
        Heads - P&P heads
        P&P Upper/Lower intakes
        P&P TB
        Double timing chain
        Hardened pushrods
        Modded retainers/seals for extra .050" clearance for lift

        Valve Springs - Comp 26918

        RWHP - Not done yet, so no dyno/numbers
        Last edited by xmetallicaxguitaristx; 05-31-2008, 01:35 PM.

        Comment


        • #34
          Re: Post your cam/heads setup for the sticky...

          Originally posted by Smoke Panther View Post
          Chad
          Abbotts Racing Heads NA cam
          210/220 .512/.512 112 LSA
          Stock Heads
          LS6 Springs
          Add 248.3 RWHP to these figures

          Comment


          • #35
            Re: Post your cam/heads setup for the sticky...

            GT2 cam
            • 216°/216° at .050"
            • Intake Lift .317" (.507" lift at 1.6:1 rocker ratio)
            • Exhaust Lift .317" (.507" lift at 1.6:1 rocker ratio)
            • 111 LSA

            stock ratio rockers
            105lb springs
            Last edited by BAD BIRD; 06-17-2009, 02:34 AM.
            headers, high flow cat, slp loudmouth
            powerdyne supercharger 6psi
            GT2 cam. all done by myself :banana:
            Hell yea

            Comment


            • #36
              Re: Post your cam/heads setup for the sticky...

              Originally posted by BAD BIRD View Post
              GT2 cam
              • 216°/216° at .050"
              • Intake Lift .317" (.507" lift at 1.6:1 rocker ratio)
              • Exhaust Lift .317" (.507" lift at 1.6:1 rocker ratio)
              • 111 LSA


              1.9 ratio rockers
              105lb springs
              .6023 lift on 105's :poke::poke:
              www.turbov6camaro.com
              1997 3800 Series II Camaro
              4600 Stall for my ride to the mall :chug:
              7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
              11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty

              Comment


              • #37
                Re: Post your cam/heads setup for the sticky...

                Originally posted by Turbo V6 Camaro View Post
                .6023 lift on 105's :poke::poke:
                thats what the people at zzp recommended me
                headers, high flow cat, slp loudmouth
                powerdyne supercharger 6psi
                GT2 cam. all done by myself :banana:
                Hell yea

                Comment


                • #38
                  Re: Post your cam/heads setup for the sticky...

                  Originally posted by BAD BIRD View Post
                  thats what the people at zzp recommended me
                  they recommended 1.9s with a cam? Yikes
                  http://www.bowtiev6.com/

                  Comment


                  • #39
                    Re: Post your cam/heads setup for the sticky...

                    Originally posted by 97rs4life View Post
                    they recommended 1.9s with a cam? Yikes
                    yeap what do you recommend ??
                    im writing an email to zzp right now
                    headers, high flow cat, slp loudmouth
                    powerdyne supercharger 6psi
                    GT2 cam. all done by myself :banana:
                    Hell yea

                    Comment


                    • #40
                      Re: Post your cam/heads setup for the sticky...

                      better tell them you were thinking of both a cam and 1.9s together and see if they misunderstood
                      http://www.bowtiev6.com/

                      Comment


                      • #41
                        Re: Post your cam/heads setup for the sticky...

                        Originally posted by 97rs4life View Post
                        better tell them you were thinking of both a cam and 1.9s together and see if they misunderstood
                        Damn more delays on these cam install that sucks ***
                        headers, high flow cat, slp loudmouth
                        powerdyne supercharger 6psi
                        GT2 cam. all done by myself :banana:
                        Hell yea

                        Comment


                        • #42
                          Re: Post your cam/heads setup for the sticky...

                          yea...your gunna run some interference with that setup there...

                          Mike
                          Abbotts Racing NA cam
                          210/220 .512/.512 112 LSA
                          Stock Heads
                          105lb springs

                          No dyno numbers yet

                          Best of 14.44@93mph spinning all of 1st, and only God knows how much of the other gears....

                          2002 SOM Z28 Camaro - 12.9 @ 104 mph
                          1996 3800 Camaro - 13.43 @ 100.77 mph


                          Project Cars | How To Guides | Scratch Repair | Synthetic Oil

                          Comment


                          • #43
                            Re: Post your cam/heads setup for the sticky...

                            Originally posted by LETZRIDE View Post
                            yea...your gunna run some interference with that setup there...

                            Mike
                            Abbotts Racing NA cam
                            210/220 .512/.512 112 LSA
                            Stock Heads
                            105lb springs

                            No dyno numbers yet

                            Best of 14.44@93mph spinning all of 1st, and only God knows how much of the other gears....
                            so what rockers will be good for these cam??
                            headers, high flow cat, slp loudmouth
                            powerdyne supercharger 6psi
                            GT2 cam. all done by myself :banana:
                            Hell yea

                            Comment


                            • #44
                              Re: Post your cam/heads setup for the sticky...

                              Originally posted by 97rs4life View Post
                              better tell them you were thinking of both a cam and 1.9s together and see if they misunderstood
                              yeap i only need the stock ones. well thats 400 bucks back to my bank account

                              thank you guys
                              headers, high flow cat, slp loudmouth
                              powerdyne supercharger 6psi
                              GT2 cam. all done by myself :banana:
                              Hell yea

                              Comment


                              • #45
                                Re: Post your cam/heads setup for the sticky...

                                Originally posted by BAD BIRD View Post
                                so what rockers will be good for these cam??
                                not sure...depends on what you want to do I guess...when I get the heads done, I would not mind trying to run a 1.7-1.8 rocker on mine...

                                2002 SOM Z28 Camaro - 12.9 @ 104 mph
                                1996 3800 Camaro - 13.43 @ 100.77 mph


                                Project Cars | How To Guides | Scratch Repair | Synthetic Oil

                                Comment

                                Latest Topics

                                Collapse

                                • ssms5411
                                  Had to get another phone
                                  by ssms5411
                                  Well my iPhone 11 Pro Max took a dump, it’s in a boot up loop, will try and get it fixed and give it to my mom. So I got a new iPhone 15 pro max, everything...
                                  1 week ago
                                • ssms5411
                                  Leaking front cover
                                  by ssms5411
                                  So I’m still leaking coolant, I think it’s my front cover, going to double check when it’s alittle warmer, got the Zzp extra thick timing cover...
                                  2 weeks ago
                                • transamtom1
                                  Went to look at 2002 V6 Firebird Vert.
                                  by transamtom1
                                  Local car on a small lot just over 100k mikes(178,000 kms)

                                  Silver with grey leather and black top 3.8L for $5400 cdn or $3975 usd as is....
                                  3 weeks ago

                                FORUM SPONSORS

                                Collapse
                                Working...
                                X