Post your cam/heads setup for the sticky...

[joe02]

Re: Post your cam/heads setup for the sticky...

Joe

210/220 .512/.512 @ 112
Abbott Racing Heads Stage 3 heads
130# springs
RWHP-not dynoed yet

[Camarorulz]

Re: Post your cam/heads setup for the sticky...

Eric
Comp GT2 216/216 .507/.507 111LSA
Stock heads
LS6 90# springs
Comp pushrods
Comp OE hydraulic lifters

No dyno/track times yet

[whiteThunder]

Re: Post your cam/heads setup for the sticky...

Eric
Custom Comp Cam 224* 224* .509 .501 @ 112 LSA + 4 degree
Stock Heads Fully Ported/ Polished 5 angle valve job, w/ portflow series valves. Mixer vanes shark finned
Comp Springs, retainers, hardened pushrods, hydraulic lifters
Comp 1.6 roller tip rockers

[Phate]

Re: Post your cam/heads setup for the sticky...

Comp Cams GT2 216/216 .507/.507 111LSA
Stock Heads P&P
Stock Lifters
Stock Springs
Stock Pushrods (All replaced OEM new)

[Turbo V6 Camaro]

Re: Post your cam/heads setup for the sticky...

up date

same cam with 1.7 rockers
OE lifters

[Smoke Panther]

Re: Post your cam/heads setup for the sticky...

Chad
Abbotts Racing Heads NA cam
210/220 .512/.512 112 LSA
Stock Heads
LS6 Springs

[airattack111]

Re: Post your cam/heads setup for the sticky...

Taylor
Comp Blower Cam
210/220 .512/.512 115 LSA
Stock heads
Comp 7.00 pushrods, Comp 105# Springs, Comp steel retainers.

[Grimm]

Re: Post your cam/heads setup for the sticky...

-
Abbott Racing Heads N/A Cam
Abbott Racing Heads Stage III P&P Heads
130lb Comp Cams Valve Springs
Hopefully 250rwhp?

[Nachius]

Re: Post your cam/heads setup for the sticky...

Shane/Nachius
Comp Cams custom grind
210/220 .320/.320 (.512/.512 at 1.6 rocker) 115LSA (this is at a 115IC) .040" smaller diameter base circle.

THR Custom big valve heads w/ flow numbers
Intake Exhaust
67 54
134 112
185 154
214 183
231 196
238 202
241 206

Comp 105# springs.

4.2L forged stroker w/ 8.2:1 compression in a GTP currently being built. Will have numbers by the end of next month.

[SpeedingFirebird]

Re: Post your cam/heads setup for the sticky...

Jason
CompCam 16.233.4 212/212 .440/.440 LSA - 110
P&P Stock heads with matched intake
Comp lifters/springs
approx hp: 200

I think the only built 3.4 using stock heads.

[benavidez19]

Re: Post your cam/heads setup for the sticky...

Erik
210/220 .512/.512 on a 112LSA
Stage 2 zzp heads
90lb springs,
OE-R comp lifters,
Double rolling chain,
Comp pushrods.

[vincente]

Re: Post your cam/heads setup for the sticky...

Vinnie
zzp gt3 comp cam
p&p intake and heads

[Two Black Marks...]

Re: Post your cam/heads setup for the sticky...

Jarl K.

Comp 212/212 duration 470/470 lift@valve 110 LSA
Stock heads...
Comp #980 springs
Crane Gold race rockers 1.6

[Richardcoelho]

Re: Post your cam/heads setup for the sticky...

where did you get the 3800 fender decals?BTW my camaro is pretty stock
:cold air intake(K&N Filter)
:Flowmaster 80series muffler.
:custom SS styled exhaust.
:160* thermostat.

[Smoke Panther]

Re: Post your cam/heads setup for the sticky...

where did you get the 3800 fender decals?BTW my camaro is pretty stock
:cold air intake(K&N Filter)
:Flowmaster 80series muffler.
:custom SS styled exhaust.
:160* thermostat.

wrong forum, wrong thread

http://forum.camarov6.com/forumdisplay.php?f=13
^search here