T-56 adapter, T-5 bellhousing, 4L60E, crossmember, etc. - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

T-56 adapter, T-5 bellhousing, 4L60E, crossmember, etc.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • T-56 adapter, T-5 bellhousing, 4L60E, crossmember, etc.

    Clearing out my garage, got a few things I need outta here.

    T-56 Adapter by "The Gear Box."

    This is a prototype setup, it had two bolt patterns to work with either a Mustang or a GM T-5 bellhousing. I'm selling this because I didn't have the time or patience to modify the T-56 that I'd already finished rebuilding. You'll need a longer input shaft, a hydraulic throwout bearing that will go over the snout of the adapter (designed for a remote throwout w/ a shifter fork). You'll need to make some modifications to the inner plate of the adapter if you get a GTO T-56 or any of the others that have a protrusion into that plane, you'll see it when you get it. Easily done if you have some machining tools or a friend with some.

    $175 Shipped



    T-5 Bellhousing for a 3800 V6 F-body.

    $75 shipped



    4L60E Yank Torque Arm Relocation Cross member. I have the bracket for the torque arm, it just wasn't in the picture.

    $75 shipped




    3800 V6 F-body flexplate. 17K miles, bought brand new from GM dealer and installed with trans rebuild. ~$115 new

    $30+shipping

    Stock steel one piece F-body driveshaft:
    $30 shipped


    SOLD
    4L60E for a 3800 V6 F-body: Built by Richard at Precision Transmission in Amarillo, TX. Supposed to be good for ~600hp at the crank. Only 17K miles on it. No track use, didn't get to use sticky tires on it either. Shifts are great, doesn't beat you to death while shifting under cruise. At WOT it will shift hard and very fast. Never missed a beat, no complaints whatsoever.

    $800 + shipping Prefer local pickup, but we all know how that is with our community.
    SOLD

    SOLD
    QA1 single adjustable front coilovers and rear shocks w/ WS6 rear springs.
    $400SOLD

    SOLD
    BMR 32mm Solid swaybar (RED)
    19mm rear swaybar off a B4C Camaro (BLACK)
    With endlinks
    $100 for the set.SOLD

    SOLDTCI Super streetfighter 3800 Stall, used for ~17K miles on my car and an unknown time in Usd2Sing's all motor/nitrous car. This is an amazing stall, and will absolutely cause you to haze street tires if you get froggy.
    $300 shipped.SOLD

    SOLDHayden 1405 Transmission cooler. 15-7/8" x 10" x 3/4"
    17K miles as well.
    $30 shipped. SOLD
    Last edited by WarShrike; 10-05-2013, 11:57 PM.

  • #2
    Re: T-56 adapter, T-5 bellhousing, 4L60E, crossmember, etc.

    Bump!

    Comment


    • #3
      Re: T-56 adapter, T-5 bellhousing, 4L60E, crossmember, etc.

      price drop!

      Comment


      • #4
        Re: T-56 adapter, T-5 bellhousing, 4L60E, crossmember, etc.

        Interested in the bellhousing. Email me at gmail - same username.

        Comment


        • #5
          Re: T-56 adapter, T-5 bellhousing, 4L60E, crossmember, etc.

          bump!

          Comment


          • #6
            Re: T-56 adapter, T-5 bellhousing, 4L60E, crossmember, etc.

            Still have the 4L60E?

            Comment


            • #7
              Re: T-56 adapter, T-5 bellhousing, 4L60E, crossmember, etc.

              Yup, check your PM.

              Comment


              • #8
                Re: T-56 adapter, T-5 bellhousing, 4L60E, crossmember, etc.

                why do you need a longer input shaft with that conversion plate? also, i don't see the reason for using the adapter snout?
                Last edited by thebeewantsboost; 09-04-2013, 09:28 PM.

                Comment


                • #9
                  Re: T-56 adapter, T-5 bellhousing, 4L60E, crossmember, etc.

                  It was originally designed for an external slave setup like the LT1 t56. The longer input shaft is a maybe. Youd have to check lengths of the input shaft and the dimensions of the t5 bellhousing and the location of the crank.

                  Comment


                  • #10
                    Re: T-56 adapter, T-5 bellhousing, 4L60E, crossmember, etc.

                    is it the same thickness as the malwood adapter?

                    Comment


                    • #11
                      Re: T-56 adapter, T-5 bellhousing, 4L60E, crossmember, etc.

                      Believe it is. Have to check.

                      Comment


                      • #12
                        Re: T-56 adapter, T-5 bellhousing, 4L60E, crossmember, etc.

                        i don't know how much luck you're gonna have selling that adapter for 200+shipping
                        i just looked at it on the gearbox website and its 205+shipping. It's a little nicer also since it's not the prototype. there aren't near as many holes. not that it really matters of course.

                        Comment


                        • #13
                          Re: T-56 adapter, T-5 bellhousing, 4L60E, crossmember, etc.

                          You're correct, and I'd changed the prices on all the other FS sections I'd had this listed on, but I missed this one lol! Price dropped a good bit.

                          Comment


                          • #14
                            Re: T-56 adapter, T-5 bellhousing, 4L60E, crossmember, etc.

                            Price dropped.

                            4L60E sold!

                            Comment


                            • #15
                              Re: T-56 adapter, T-5 bellhousing, 4L60E, crossmember, etc.

                              do you have the extended pilot bushing?

                              Comment

                              Latest Topics

                              Collapse

                              • 3.4 slow to go
                                hey there strangers!
                                by 3.4 slow to go
                                been a while but looks like i'm back in the game thanks to my brother. he went and bought an'02 bird, and since i'm a technician at the nissan place...
                                3 hours ago
                              • ssms5411
                                Had to get another phone
                                by ssms5411
                                Well my iPhone 11 Pro Max took a dump, it’s in a boot up loop, will try and get it fixed and give it to my mom. So I got a new iPhone 15 pro max, everything...
                                1 week ago
                              • ssms5411
                                Leaking front cover
                                by ssms5411
                                So I’m still leaking coolant, I think it’s my front cover, going to double check when it’s alittle warmer, got the Zzp extra thick timing cover...
                                2 weeks ago
                              • transamtom1
                                Went to look at 2002 V6 Firebird Vert.
                                by transamtom1
                                Local car on a small lot just over 100k mikes(178,000 kms)

                                Silver with grey leather and black top 3.8L for $5400 cdn or $3975 usd as is....
                                3 weeks ago

                              FORUM SPONSORS

                              Collapse
                              Working...
                              X